Products
Wheel Alignment Measuring System
The Wheel Alignment Measuring System is composed
of the Wheel Alignment Displacement Transducer
WAD-1B and the exclusive analyzer WAM-1A. The
Wheel Alignment Measuring System can also measure
the steering angle and camber angle simultaneously in
addition to the three-direction displacement of the
wheel center by being installed to the 6-Component
Wheel Force Transducer that measures the orthogonal
three-direction load and the three moments around it
that are passed to the tires from the road surface.
Measurements are output in voltage format in real time
through the car-mountable analyzer. The exclusive
Wheel Alignment Analyzer WAM-1A, which is USBconnected
to a PC, is responsible for everything from
settings to measurement. Control up to 4 units simultaneously
with the included control software WAM-701A.
Voltage output is also supported by the optionallyavailable
Multi Recorder TMR-200, which allows waveform
monitoring using the display unit TMR-281.
Features
- Wheel center orthogonalized 3-direction displacement
- Steering angle
- Camber angle
- Controls up to 4 units simultaneously
System Block Diagram
Wheel Alignment Displacment transducer WAD-1B
The Wheel Alignment Displacement Transducer is combined with the Wheel Alignment Analyzer WAM-1A to measure each displacement in the wheel center's X, Y, and Z axes while driving, as well as the changes in steering angle and camber angle. After the Wheel Alignment Displacement Transducer is installed to a fixed point on the car, the end of the displacement transducer is linked to the head of the wheel (6-Component Wheel Force Transducer SLW) to make it follow the movement, which allows the rotary encoder to measure the angle changes of the link corresponding to the wheel movement. The Wheel Alignment Analyzer WAM-1A outputs displacements and angles in voltage form in real time. The displacement transducer is also equipped with the slip-ring support function required to maintain the reference position of the 6-Component Wheel Force Transducer (SLW) in a constant position.
Wheel Alignment Analyzer WAM-1A
The Wheel Alignment Analyzer is combined with the
Alignment Displacement Transducer (WAD-1B) to
measure each displacement in the wheel center's X, Y,
and Z axes while driving, as well as the steering angle
and camber angle. Measurements are output in
voltage form in real time.
Features
- Small and lightweight - Reduction of instllation space
- Capable of setting alignment displacement transducer data and analyzer with a PC
- Control software (WAM-701A) included
- Controls up to 4 units simultaneously
