Products

Switching Box Index

Switching Box

  • IHW-50G
  • IHW-50G
    The IHW-50G is an A/D converter integrated switching box to offer high speed and high accurate measurement in combination use with TML data loggers. It can scan 50 channels in 0.4 seconds and furthermore 1000 channels in 0.4 seconds in combination use with TDS-630,TDS-540 or TDS-530 data logger. In addition to strain measurements, DC voltage, temperature with PtRTD and thermocouple are also measured.
  • IHW-50H
  • IHW-50H
    The IHW-50H is an exclusive switcing box for the high speed and high performance data logger TDS-630. In order to realize for high speed transfer of large capacity data between the data logger and switching box, the IHW-50H is compatible with the newly adopted high speed communication method TML-LINK. It is cascaded up to the maximum 20 units with the TDS-630 data logger and enables the maximum 1000 channel strain measurement in 0.1 seconds. The IHW-50H has 50 channels and can measure strain gauges, thermocouples, Pt RTD and DC voltage.
  • ISW-50G
  • ISW-50G
    The ISW-50G is an A/D converter integrated switching box designed to extend measuring channels in combination with TML data loggers TDS-540,TDS-530, TDS-602 or TDS-303. Combined use with the TDS-530 makes 1000 channel measurement in 2 seconds at the fastest.
  • SSW-50D
  • SSW-50D
    The SSW-50D switching box is used in combination with TML Data Loggers to expand the measuring channels. The number of measuring channel is 50 per unit, and in addition to measurements of strain in ordinary bridge configurations, DC voltage and thermocouple, and a new strain measurement method with a 1-gauge 4-wire is provided.
    Since modular connector plugs are available for the 1-gauge 4-wire measurement, wire connection can be speedy finished.
  • ASW-30C/ASW-50C
  • ASW-30C/ASW-50C
    These are switching boxes to expand measurement channels in combination with TML data loggers.
  • FSW-10L
  • FSW-10
    This is an exclusive 10-channel unit for use with portable data logger TDS-150. Its functions are the same as those of the FSW-10 except that the FSW-10L does not have connector receptacles for NDIS one-touch plugs and 1-gauge 4-wire modular plugs. Owing to this, it is of smaller size than the FSW-10.
  • CSW-5B
  • CSW-5B
    This is a 5-channel switching box used exclusively with handheld data logger TC-32K for extending the number of measurement points. It can measure strain, DC voltage, thermocouple and Pt-RTD.
    As for the CSW-5B-05, it is equipped with NDIS connector receptacle for every channel in addition to ordinary connecting terminals, which is convenient for use with strain gauge based transducers.
  • SW-21B/SW-21E
  • SW-21B/SW-21E
    The SW-21B and SW-21E are 20-channel switching boxes which allow multiple channel measurement in combined use with the TC-32K or TC-31K. Each channel is changed over manually. Measurements of strain and DC voltage are possible. The SW-21B is equipped with an initial balancer for each channel, which is adjusted manually by 10-turn potentiometer.

Page Top