Network Module

Network Module
Strain Quarter Bridge Module NSW-011C

This is a low consumption module dedicated to quarter bridge 3-wire connection. The extension distance and number of connection are improved compared to conventional modules.

Strain Quarter Bridge Module NSW-011C
  • Specifications

    Type NSW-011C
    Number of measurement point 1 point
    Measurement time 200 ms/points (including transfer time)
    Programmable item Channel number (000 to 999)
    Measurement mode Strain quarter bridge 3-wire method
    Applicable gauge resistance Either 120 Ω or 350 Ω (to be specified when ordering)
    Measuring range

    ±30000 x 10-6 strain

    Dimensions 50(W) x 20(H) x 100(D) mm
    Weight Approx. 250 g

Network Module
Strain Full Bridge Module NSW-014C

This is a low comsumption module dedicated to full bridge connection including strain gauge based transducer. The extension distance and number of connection are improved compared to conventional modules.

Network Module Strain Full Bridge Module NSW-014C
  • Specifications

    Type NSW-014C
    Number of measurement point 1 point
    Measurement time 200 ms/point (including transfer time)
    Programmable item Channel number (000 to 999)
    Measurement mode Strain full bridge
    Applied gauge resistance 120 to 1000 Ω
    Measuring range

    ±30000 x 10-6 strain

    Dimensions 50(W) x 20(H) x 100(D) mm
    Weight Approx. 250 g

Network Module
Strain Full Bridge 2-Channel Module NSW-024C

This is a low-consumption, 2-channel network module for full bridge strain gauge-type transducers.

Network Module Strain Full Bridge 2-Channel Module NSW-024C
  • Specifications

    Type NSW-024C
    Number of measurement point 2 points
    Measurement time 200 ms/point (including transfer time)
    Programmable item Channel number for input 0 : 000 to 998
    Channel number for input 1 : INPUT +1
    Measurement mode Strain full bridge
    Applied gauge resistance 120 to 1000Ω
    Measuring range ±30000 x 10-6 strain
    Dimensions 95(W) x 20(H) x 100(D) mm
    Weight Approx. 300 g

Network Module
Counter Module NSW-01CC

A module that counts precipitation, flow rate, quantity, number of vehicles that pass by, frequency of machine operation, and other information with no-voltage contact or open collector input.
A built-in backup battery allows to continue counting even when the power supply is not available.

NSW-01CC
  • Specifications

    Type NSW-01CC
    Measured object Precipitation meter, etc.
    Number of measurement point 1 point
    Measurement time 200 ms/point (including transfer time)
    Programmable item Channel number (000-999)
    Input signal Non-voltage contact / Open collector signal Square Wave
    Responding pulse width 0.01 sec or more
    Measuring range 0 ~ 31999 counts
    Measurement data Accumulated counts
    Reset At power on / Full count / External rese
    Back up Alkaline AA dry batteries x 3 pcs. Approx. 3 months
    Dimensions 95(W)×35(H)×100(D)mm
    Weight Approx. 250 g (Alkaline AA dry batteries x 3 pcs. 70 g not included)

    Note: The counter module NSW-01CC is not a low-consumption type, but four units of NSW-01CC can be connected when 100 units are connected, and the total length is 2,000 m. 


    *Connection of four units and more is possible depending on the conditions.