| Type |
Component |
Applicable temperature range(°C) |
Content |
Remarks |
| W-1 |
Microcrystalline wax |
0 to +50 |
500g |
To be heated to melt and applied by brush. Suited for a prime coat of duplex coating. |
| N-1 |
Chloroprene rubber |
-30 to +80 |
90g |
To be applied by brush and allowed to dry in the air. |
| K-1 |
Special rubber |
-269 to +60 |
90g |
Gives less stiffening effect even in cryogenic temperature. |
| SB tape |
Butyl rubber |
-30 to +80 |
10mm×3mm
5m long/roll |
Tape form coating convenient for use. Suited for a prime coat of duplex coating. |
| VM tape |
Butyl rubber |
-20 to +80 |
38mm×1mm
6m long/roll |
Tape form coating convenient for use. Suited for a second coat of duplex coating. |
| Araldite A |
Epoxy |
-60 to +100 |
1.8kg in can
Two component |
Used as outer coat of duplex coating for mechanical protection. |
180ml in tube
Two component |
| Araldite B |
Epoxy |
-60 to +180 |
1.4kg
Two component |
Applicable to high temperature
environment for mechanical protection. |
| Bond 1521B |
Chloroprene rubber |
-30 to +100 |
150ml |
Used as outer coat of duplex coating. |
| KE-348 |
Silicone |
-50 to +200 |
100g |
Suited for high temperature environment. |
