Products

Strain gauge with a connector

With strain gauge connector (standard length: 1m)

1m lead with a strain gauge attached vinyl lead wire terminal connector. F, PF, P gauge connector will connect with the processing of the series lead. You can use the connector with strain gauge and the specimen if there is more than one such body the same gauge connection in the vicinity of the specimen to be extended, No need for wiring to reduce the disposal of the lead can.

Strain gauge with connector (2 wire)

Type (1m with) □-1LC
Of mind / diameter
(cross section)		 10/0.12
(0.11mm2)
(□: Type Gauge)

    Connectors with strain gauge (3 wire)

    Type (1m with) □-1LCT
    Of mind / diameter
    (cross section)    		 10/0.12
    (0.11mm2)
    (□: Type Gauge)

Lead wire with connector

The strain gauge lead wires with connectors only extend the length of the standard 10m, 20m is. This leads you use repeatedly. Also non-standard lead wire length, the length of your stay will be made. (Special order)

Lead wire with connector
(irregular 3-wire)

Type (10m) 10LC
Of mind / diameter
(cross section)		 20/0.18
(0.5mm2)

    Lead wire with connector (3 wire)

    Type (10m) 10LCT
    Of mind / diameter
    (cross section)    		 20/0.18
    (0.5mm2)

Example combinations (these two are the only pattern)

If using wire connectors with strain gauge

2wireStrain gauge with connector (2 wire)
Lead wire with connector (irregular 3-wire)

connector with strain gauge

If you use 3-wire connector with strain gauge

3-wireConnectors with strain gauge (3 wire)
Lead wire with connector (3 wire)

connector

Page Top