Products
Relay cable
1-Gauge 3-Wire Strain measurement method
This relay cable consists of an extension and relay terminals of the
same type as those used in the switching box. The cable allows
connection of a quarter-bridge strain gauge. By routing the relay
cable to a location near the test specimen, the strain gauge does
not require long lead wires for attachment to the specimen. Relay
cable can be used repeatedly.
| Type | Length of cable standard (m) |
No. of connection |
Operational temperature (°C) |
Dimension Wide×Depth×Height (mm) |
Core/diameter (Cross section area) |
| GLJ-5A(10) | 10 | 5 | 0~+80 | 170×66×approx.46 | ø11.1mm 20/0.18 (0.5mm2) |
| GLJ-5A(20) | 20 |
Chain Strain Gauges measurement method
These gauges are specially designed to use TML New method for strain measurement and need our Data Logger TDS-530 and TDS-630 with built-in the method. For the details, contact TML.
the strain gauge does not require long lead wires for attachment to the specimen. Relay cable can be used repeatedly.
| Type | Length of cable standard (m) |
No. of connection |
Operational temperature (°C) |
Dimension Wide×Depth×Height (mm) |
Core/diameter (Cross section area) |
| CGLJ-10A(3) | 3 | 10 | 0~+80 | 170×66×approx.46 | ø11.1mm 20/0.18 (0.5mm2) |
