Products

General Displacement Transducer Index

Compression-family

  • CDP-M Small Displacement Transducer[5-100mm]
  • CDP-M
    The CDP-M is a small and high sensitive displacement transducer. Compared with conventional CDP series, its output is the same but its diameter is less by 50 - 20% than that of CDP, and its temperature range is extended up to +80°C. The CDP-M with cable output along the measurement axis and the CDP-MT with cable output vertical to the axis are available. The transducer can be used not only for static measurement but also for quasi-dynamic measurement. A fixing holder is supplied as a standard accessory. Options include ordinary magnet stand MB-B and small MB-PSL specified for the CDP-M series.
  • CDP Displacement Transducer[5-100mm]
  • CDP
    The CDP is a compact and easy-to-operate displacement transducer. Because it is designed to produce a large output and to deliver stable performance, highly accurate measurements can be made. It is suitable for both static and dynamic measurements.
  • CDP-B Drip-proof type Displacement Transducer[5-25mm]
  • CDP-B
    The CDP-B displacement transducer is the CDP displacement transducer with a bellows attached to the measuring rod. It is used if measurement must be made in an adverse on-site environment.
  • CDP-D Displacement Transducer with dual ports[50/100mm]
  • CDP-D
    The CDP-D displacement transducer is the CDP displacement transducer with dual isolated I/O ports. For example, one set of input and output cables can be connected to an analog measuring instrument and the other set to a digital measuring instrument. With two different types of measuring equipment connected to this transducer, simultaneous measurements can be made without interference.
  • DDP-A Dial gauge type Displacement Transducer[10-50mm]
  • DDP-A
    The DDP-A displacement transducer is a dial gauge with a strain sensing element and a bridge circuit integrated. The amount of displacement can be checked by viewing the pointer while the output from the sensing element can be used to control a recorder or a machine.
  • SDP-C Displacement Transducer[50/100mm]
  • SDP-C
    The SDP-C displacement transducer is a general-purpose, strain gauge type transducer. Designed with a strain-generating cantilever, it is able to make stable measurement while maintaining the high sensitivity to minuscule displacements.
  • SDP-CT Tension use Displacement Transducer[50/100mm]
  • SDP-CT
    The SDP-CT displacement transducer is a general-purpose, strain gauge type transducer, and features measurement of tension displacement using hook bolt. Designed with a strain-generating cantilever, it is able to make stable measurement while maintaining the high sensitivity to minuscule displacements.
  • SDP-D Displacement Transducer[200/300mm]
  • SDP-D
    The SDP-D displacement transducer is an axial-type transducer with a measuring range of 200 mm or 300 mm. The strain gauge type design makes this transducer free of noise caused by a sliding electrical contact. Taking advantage of the stroke of the axial part, it can measure a large amount of displacement and make stable measurement over a long period of time. As it is provided with graduations, alignment work can be done easily.
  • FDP-A Waterproof Displacement Transducer[10-100mm]
  • FDP-A
    The FDP-A is a DC operated LVDT which can be measured with not only our TDS series data loggers but DC excitation type dynamic strainmeters and handheld strainmeters. In addition to high output and high response, its waterproof structure and all stainless steel made external parts make this transducer well suited to underwater measurement.
  • CE Cantilever type Displacement Transducer[2-10mm]
  • CE
    The CE displacement transducer has the structure of strain gauges mounted on a cantilever. The high responsiveness to displacement and the simple structure allow this transducer to make accurate and stable measurement and to be installed in a confined space.
  • OU Ring type Displacement Transducer[10-30mm]
  • OU
    The OU displacement transducer is a combination of a round plate spring and strain gauges. It is mounted with its contact tip pressed against a structure. When displacement occurs in the structure, the plate spring is deformed and an output proportional to the displacement can be output.

Page Top