Strain gauge with a connector

With strain gauge connector (standard length: 1m)

1 m lead with a strain gauge attached vinyl lead wire terminal connector. F, PF, P gauge connector will connect with the processing of the series lead. You can use the connector with strain gauge and the specimen if there is more than one such body the same gauge connection in the vicinity of the specimen to be extended, No need for wiring to reduce the disposal of the lead can.
* Connector block is sold separately.

With strain gauge connector (standard length: 1m)
  • Specifications

    Strain gauge with connector (2-wire)

    Type (1m with) ♦-1LCJC
    Of core / diameter
    (cross section)
    10/0.12 (0.11 mm2)

    (♦: Type Gauge)

     

    Connectors with strain gauge (3-wire)

    Type (1m with) ♦-1LCJCT
    Of core / diameter
    (cross section)
    10/0.12 (0.11 mm2)

    (♦: Type Gauge)

Lead wires with connector

Special extension lead wire for connector-integrated strain gauges, standard lengths are 10 m and 20 m. These lead wires can be used repeatedly. In addition to standard lead wire lengths, we can make lead wires to any length (made-to-order).

  • Specifications

    Lead wires with connector (irregular 3-wire, 2-wire system)

    Type (10 m) 10LCJC
    Conductors/wire diameter (cross-sectional area) 10/0.12(0.11mm2)

     

    Lead wires with connector (3-wire system)

    Type (10 m) 10LCJCT
    Conductors/wire diameter (cross-sectional area) 10/0.12(0.11mm2)