AW-6-350/AWCA-6-350/AWRA-6-350 Quarter bridge with 3-wire system (G.F. 2.1 approx.)
This gauge has corrosion-resisting stainless steel base with thickness of 0.08 mm. It is easily installed by using a dedicated spot welder W-50RC.
It is suited to strain measurement up to 300°C, measurement of specimen to which adhesion is not applicable, and/or long term measurement.
| Main object material | Metal |
|---|---|
| Operational temperature | -196 to +300℃ |
| Temperature compensation range | +10 to +100℃ |
| Bonding adhesive | Spot welding (TML spot welder W-50R is required) |
| Backing | SUS304 |
| Element | Special alloy |
| Strain limit | 0.5% (5000 x 10-6 strain) |
| Fatigue life at room temperature | 1 x 106 (±1000 x 10-6 strain) |
-
Specifications
Leadwire used ø0.2 fluorinated resin (PTFE) leadwire 0.1m
Type Element Gauge
length
(mm)Gauge base Test specimen Resistance in (Ω) Dimensions (mm) Material AW-6-350-11-4FB01LT Single-element 6 L24 x W5 SUS304 Mild steel 350 AWCA-6-350-11-4FB01LT 2-element 6 L29 x W29 AWRA-6-350-11-4FB01LT 3-element 6 L29 x W29 Each package contains 5 strain gauges.
Other cable length available on request
