Achieves a response frequency 10 times faster than the TMR-321!

The unit samples signals from sensors at a maximum rate of 1 MHz and records the data. Applicable sensors include strain sensors using the 4-gauge method and strain gauge-type transducers. Additionally, voltage measurements are possible by using attenuator cables.

New IEPE Sensor Unit for the Multi Recorder TMR-300 Series!

Compatible with ICP^® / IEPE Sensors
*IEPE: Integrated Electronic Piezo-Electric

In response to customer demand, we are pleased to announce the availability of a 350Ω version of the FLX-1 strain gauge, optimized for measuring transverse strain in confined spaces.

This strain gauge is designed for stress concentration analysis and features a gauge resistance of 350Ω. Temperature compensation is available for material codes 11, 17, and 23. This model is a sister product to the FLX-1 with a 120Ω gauge resistance.

KM-50M Now Available – A New Capacity Variant in the Slimmer KM-M Series

Our Strain Transducer are designed to measure not only the behavior of materials like concrete, mortar, and synthetic resins after hardening, but also the strain that occurs during the curing process.
In response to growing demand for strain measurement inside concrete with thinner cover thickness, we have developed the KM-50M — a new, smaller-diameter, low-elasticity strain transducer.
This model offers improved performance over our existing KM-50F, making it ideal for applications requiring compact and sensitive measurement solutions.

New 2mm Gauge Length Model Added to AW Series Weldable Strain Gauges!

This model incorporates a high-temperature strain gauge element thermally bonded to a stainless steel substrate using a specially formulated heat-curing adhesive.
Engineered for demanding applications, this strain gauge is particularly well-suited for: Strain measurement in high-temperature environments up to 300°C
Situations where adhesive bonding of strain gauges is impractical or unreliable Long-term strain monitoring in harsh or inaccessible environments

Weldable Strain Gauge Compatible with Full Bridge — Optimized for Long-Term Stability

This strain gauge incorporates a full bridge configuration and features a gauge factor of approximately 4. It is specifically designed for use in high-temperature environments up to 200°C, in locations where adhesive bonding is impractical, and in applications requiring stable, long-duration strain measurement