Measure Type Displacement Transducer

Wire Type Displacement Transducer WD-A 250mm~1000mm

Displacement transducer for measuring large displacement. 
Measurement by pulling out a stainless wire. The wire tension remains constant regardless of displacement. A compact, lightweight, and highly precise displacement transducer. 
Protection ratings : IP 20 equivalent

Wire Type Displacement Transducer WD-A
Features

・Increased stability of measuring the displacement at low speed. 
・Compact, lightweight
・Measurement of large displacement
・Constant wire tension
・Simple handling

  • Specifications

    Type Capacity Rated output Sensitivity
    (×10-6strain/mm)
    Non-
    linearity
    Temperature
    range
    WD-250A

    250mm

    5mV/V
    (10000×10-6 strain)
    ±0.3%
    40 0.3%RO -10 to +80 ℃
    (no condensation)
    WD-500A 500mm 20
    WD-1000A 1000mm 10

    *Spike noise may be generated when measuring at lower displacement speeds than 0.1 mm/s.
    Output Polarity

     

    Output polarity

    The measurement moves in the plus (+) direction to the direction in which the wire is pulled out. 

DP-G Tape Measure Type Displacement Transducer 500mm to 2000mmCE

The DP-G is a displacement transducer designed for measurement of large displacement. A stainless steel wire is drawn out to measure the displacement. The wire tension is constant regardless of the displacement. It is a small and light transducer with excellent accuracy.

Protection ratings : IP 40 equivalent

DP-G
Features
  • Small and light
  • Measurement of large displacement
  • Wire tension is constan
  • Easy handling
  • Specifications

    Type Capacity Rated output Sensitivity
    (×10-6 strain/mm)
    Non-
    linearity
    Temperature
    range
    DP-500G 500 mm 5 mV/V
    (10000×10-6 strain) ±0.3 %
    20 0.3 %RO -10 to +80 ℃
    (no condensation)
    DP-1000G 1000 mm 10
    DP-2000G 2000 mm 5

    *Spike noise may be generated at speeds lower than 10 mm/s.

    Output polarity

    img-trout-02-1

    Measurement moves in the plus direction with regard to the direction the wire is drawn out in.

DP-E Tape Measure Type Displacement Transducer 5000mm

The DP-E is a displacement transducer designed for measurement of large displacement. A stainless steel wire is drawn out to measure the displacement. The wire tension is constant regardless of the displacement. It is a small and light transducer with excellent accuracy.

Protection ratings : IP 40 equivalent

DP-E Tape Measure Type Displacement Transducer
Features
  • Large displacement up to 5000 mm is possible
  • Wire tension is constant
  • Easy handling
     
  • Specifications

    Type Capacity Rated output Sensitivity
    (x10-6 strain/mm)
    Non-
    linearity
    Temperature
    range
    DP-5000E 5000 mm 5 mV/V
    (10000×10-6 strain) ±0.3 %
    2 0.3 %RO -10 to +80 ℃
    (no condensation)

    Output polarity

    img-trout-02

    Measurement moves in the plus direction with regard to the direction the wire is drawn out in.