Inclinometer accessories

Inclinometer accessories

Guide Pipe KBF-31/KBF-21/KBF-51/IM-GP

These pies are used to hold inclinometers for insertion in the ground.

Aluminium Pipe
KBF-31-1 : 1m 
KBF-31-2 : 2m 
KBF-31-3 : 3m 
KBF-21-3 : 3m 
IM-GP-1A : 1m 
IM-GP-2A : 2m 
IM-GP-3A : 3m 

o_inc-kbf31

Type D
KBF-31 56 52 49 6
KBF-21 78 74 69 6
IM-GP 50.5 46.5 43.5 3

ABS resin guide pipe
KBF-51-2:2m

o_inc-kbf51

 

 

Guide Pipe Socket KBF-32/KBF-22/KBF-52/IM-GP-SA

These pies Socket are used to connect guide pipes.

Aluminium Pipe Socket
KBF-32
KBF-22
IM-GP-SA

o_inc-IM-GP-SA

Type
KBF-32 59.5 55.5
KBF-22 83.5 79.5
IM-GP-SA 54 50

ABS resin guide pipe Socket
KBF-52

o_inc-kbf52

Aluminium Guide Pipe Cap

These caps are used to prevent muddy water from entering the Aluminium guide pipes. (Cap available for both top and booottom.)

KBF-34
KBF-24
IM-GP-CA

KBF-34_24

ABS resin cap for guide pipe

Prevents muddy water from entering the ABS resin guide pipe.

Head cap
KBF-54-1

KBF-54-1-ABS

Bottom cap
KBF-54-2

KBF-54-2-ABS

Rod End

KBF-36-1  Used to fix the uppermost part of a multistage inclinometer (KB-JG/KB-KG/KB-KD) 
KBF-26-1  Used to fix the uppermost part of a multistage inclinometer (KB-JH/KB-KH) 
KBF-36-3  Used to fix the uppermost part of a multistage inclinometer (NKB-LF/NKB-MF) 
IM-RE  Used to fix the uppermost part of a multistage inclinometer (IM-UA/IM-BA) 

o_inc-kbf36  o_inc-kbf363

Cable Holder KBF-37

When measuring with an insertion-type inclinometer (KB-GC/KB-HC), the cable is held at the measurement position.

KBF-37-holder

Rivet KBF-38/KBF-28

KBF-38  Rivet for fixing guide tubes (KBF-31) and guide tube sockets (KBF-32)
              Rivet for fixing guide tubes (IM-GP) and sockets (IM-GP-SA)
KBF-28  Rivet for fixing guide tubes (KBF-21) and guide tube sockets (KBF-22)

KBF-39-rivet

Riveter KBF-39(HR002D)

This Rivet is a pair of pliers used to mount KBF-38(HR002D) Rivets.

KBF-39

Suspension Fitting KBF-39-2

Auxiliary fittings for installing multi-stage inclinometers

Storage Trunk KBF-60

Storage trunk for the main unit for insertion-type inclinometers (KB-GC/KB-HC)

KBF-60-case

Removal Plier KBF-39-1

This Pliers are used to remove Relay Rods and Extension Rods from Inclinometers.

KBF-39-1-plier

Relay Rod

This rods are used to connect Multi-layer Inclinometers on multiple levels.

o_inc-rod

Type L (mm)
1m KBF-33JG-1
(old : KBF-33-1)
512
KBF-33KG-1 342
KBF-33LC-1 372
2m KBF-33JG-2 1512
KBF-33KG-2 1342
KBF-33LC-2 1372
KBF-33MC-2 1225

Extension Rod KBF-33L

The KBF-33 Rods are used to extend Relay Rods.

Type L (mm)
KBF-33L-1 1012
KBF-33L-2 2012

Tapping screw KBF-58

Screw for fixing ABS resin guide tube (KBF-51-2) and guide tube socket (KBF-52)